NEC SL2100 - Page 770

Program
No.
Program Name Input Data Default
11-10-47 Service Code Setup (for System Administrator) -
Warning Message Setting
0~9,
*
, # Maximum of 8 digit 615
11-10-48 Service Code Setup (for System Administrator) -
Auto Dial Setting for Security Sensor
0~9,
*
, # Maximum of 8 digit 617
11-12-62 Service Code Setup (for Service Access) - Secur-
ity Sensor Reset
0~9,
*
, # Maximum of 8 digit 716
11-12-63 Service Code Setup (for Service Access) - Watch
Mode Start
0~9,
*
, # Maximum of 8 digit 717
11-12-64 Service Code Setup (for Service Access) - Secur-
ity Sensor Mode Start
0~9,
*
, # Maximum of 8 digit 719
15-07 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-44-01 Watch Mode Setup - Internal Paging Group for
Watch Message
0 ~ 50 0
20-44-02 Watch Mode Setup - External Paging Group for
Watch Message
0 ~ 8 0
20-44-03 Watch Mode Setup - VRS Message for Watch
Mode
0 ~ 100 0
20-44-04 Watch Mode Setup - Interval Timer for Watch
Message
0 ~ 60 0
20-46-01 Security Sensor Setup - Sensor Mode 0 = Off
1 = On
0
20-46-02 Security Sensor Setup - Internal Paging Group
for Warning Message
0 ~ 50 0
20-46-03 Security Sensor Setup - External Paging Group
for Warning Message
0 ~ 3 0
20-46-04 Security Sensor Setup - VRS Message for Warn-
ing
0 ~ 100 0
20-46-05 Security Sensor Setup - Auto Dial Number Area
Setting
0 ~ 999 0
20-46-06 Security Sensor Setup - VRS Message for An-
swer
0 ~ 100 0
20-46-07 Security Sensor Setup - Auto Dial Wait Timer 0 ~ 64800 30
20-46-08 Security Sensor Setup - Time of Repeat Auto Di-
al
0 ~ 255 3
20-46-09 Security Sensor Setup - Auto Dial Calling Time 0, 1 ~ 3600
0 = No Auto Dial
30
20-46-10 Security Sensor Setup - Monitored Terminal Extension Number (Up to 8 dig-
its)
No Setting
20-46-11 Security Sensor Setup - Interval of Auto Dial 0 ~ 3600 0
20-47-01 Time pattern setting for Watch Mode - Watch
Mode Time Pattern
0 = Off
1 = On
0
20-48-01 Time pattern setting for Security Sensor - Secur-
ity Sensor Time Pattern
0 = Off
1 = On
0
20-55-01 Delay Timer for Security Sensor - Sensor delay
timer
0 ~ 3600 (seconds)
0 = Sensor will start immediately
60
35-02-22 SMDR Output Options - Security Auto Dialing 0 = No Output
1 = Output
1
82-21-01 Sensor Setup - Sensor Type 0 = Close Detect
1 = Open Detect
0
SL2100 ISSUE 1.0
1-756
Security
S