Program
No.
Program Name Input Data Default
13-04-04 Speed Dialing Number and Name - Transfer Des-
tination Number
If Transfer mode is (Refer to
13-04-03) :
1 = Internal Dial Mode
1 ~ 9, 0,
, #, P, R, @
(Maximum 36 Characters)
2 = Incoming Ring Group
0 ~ 25 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when using
ISDN functionality
3 = Remote Monitor
Dial (Up to 8 digits)
No Setting
15-07 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-21-05 System Options for Long Conversation - Conver-
sation cutoff for remote monitor
0 ~ 64800 seconds 180
11-10-49 Service Code Setup (for System Administrator) -
Auto Dial Setting for Remote Inspection
0~9,
, # Maximum of 8 digit 619
20-45-01 Remote Watch Setup - Ring Terminal for Remote
Inspection
Extension Number (Up to 8 dig-
its)
No Setting
20-45-02 Remote Watch Setup - Ring Time Setting 0000 ~ 2359 0000
20-45-03 Remote Watch Setup - Ring Timer 0 ~ 60 0
20-45-04 Remote Watch Setup - Auto Dial Number Area
Setting
0 ~ 999 0
20-45-05 Remote Watch Setup - VRS Message for Answer 0 ~ 100 0
20-45-06 Remote Watch Setup - VRS Message for Auto Di-
al
0 ~ 100 0
20-45-07 Remote Watch Setup - Time of Repeat Auto Dial 0 ~ 255 0
20-45-08 Remote Watch Setup - Auto Dial Calling Time 0 ~ 3600 0
20-45-09 Remote Watch Setup - Interval of Auto Dial 0 ~ 3600 0
35-02-23 SMDR Output Options - Watch Auto Dialing 0 = No Output
1 = Output
1
90-10-01 System Alarm Setup - Alarm type Refer to Programming
Manual
90-10-02 System Alarm Setup - Report 0 = Not Report (No autodial)
1 = Report (autodial)
Refer to the Program-
ming Manual for the
default values.
90-20-11 Traffic Report Data Setup - Security Sensor Dial
Record
0 = Not Recorded
1 = Recorded
1
Watch mode:
Program
No.
Program Name Input Data Default
10-03-05 ETU Setup - Select Port type 0 = SLT (082U-SLT Port 1/2)
1 = Door Phone (082U-SLT Port
1/2)
0
11-10-46 Service Code Setup (for System Administrator) -
Watch Message Setting
0~9,
, # Maximum of 8 digit 614
ISSUE 1.0 SL2100
Features and Specifications Manual 1-755
S
To Next Page
Loading...
