Default Settings
None
System Availability
Terminals
Multiline Terminal (except IP Multiline Terminal)
Required Component(s)
082U-B1
Related Features
Paging Internal, External
Voice Response System (VRS)
Speed Dial
Guide to Feature Programming
Room Monitoring:
Program
No.
Program Name Input Data Default
11-10-45 Service Code Setup (for System Administrator) -
Room Monitor Permit
0~9,
, # Maximum of 8 digit 610
13-04-01 Speed Dialing Number and Name - Number Maximum of 36 digits (0 ~ 9,
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
13-04-03 Speed Dialing Number and Name - Transfer
Mode
0 = Not Used (Calls will not be
routed based off a users caller
ID.)
1 = Internal Dial (Calls will be
routed to an internal number
specified in PRG 13-04-04.)
2 = Incoming Ring Group (Calls
will be routed to a ring group
specified in PRG 13-04-04.)
3 = Remote Monitor (Used for
the security feature and not Flex-
ible Caller ID routing.)
0
SL2100 ISSUE 1.0
1-754
Security
S
To Next Page
Loading...
