NEC SL2100 - Page 898

Program
No.
Program Name Input Data Default
20-04-05 System Options for Virtual Extensions - Ring-
tone mode for incoming to VE
0 = Off
1 = On
0
20-10-08 Class of Service Options (Answer Service) - Vir-
tual Extension Off-Hook Answer
0 = Off (Ringing Line Preference
Disabled)
1 = On (Ringing Line Preference
Enabled)
COS 01 ~ 15 = 1
20-15-03 Ring Cycle Setup - Incoming Signal Type : In-
coming Internal Call
Ringing Cycle Number : 1 ~ 13 3
22-03-01 Trunk Ring Tone Range - Ring Tone Pattern 0 = Tone 1
1 = Tone 2
2 = Tone 3
3 = Tone 4
4 = Melody 1 (2W Digital/IP Mul-
tiline Terminal Mode)
5 = Melody 2 (2W Digital/IP Mul-
tiline Terminal Mode)
6 = Melody 3 (2W Digital/IP Mul-
tiline Terminal Mode)
7 = Melody 4 (2W Digital/IP Mul-
tiline Terminal Mode)
8 = Melody 5 (2W Digital/IP Mul-
tiline Terminal Mode)
9 = Tone 5 (2W Digital/IP Multi-
line Terminal Mode)
10 = Tone 6 (2W Digital/IP Multi-
line Terminal Mode)
11 = Tone 7 (2W Digital/IP Multi-
line Terminal Mode)
12 = Tone 8 (2W Digital/IP Multi-
line Terminal Mode)
0
15-02-30 Multiline Telephone Basic Data Setup - Toll Re-
striction Class
0 = Virtual Extension (Follows
virtual extension Toll Class in
PRG 21-04.)
1 = Real Extension (Follows
physical stations Toll Class in
PRG 21-04.)
1
15-08-01 Incoming Virtual Extension Ring Tone Setup - In-
coming Ring Pattern
0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = )Melody4 (2W Digital/IP Mul-
tiline Terminal)
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-07-10 Class of Service Options (Administrator Level) -
Programmable Function Key Programming (Ap-
pearance Level)
0 = Off
1 = On
COS1 ~ 14/COS15 = 1
20-13-27 Class of Service Options (Supplementary Serv-
ice) - Busy on Seizing Virtual Extension
0 = Off
1 = On
COS 01 ~ 15 = 1
21-01-15 System Options for Outgoing Calls - Outgoing
Disable on Incoming Line (Toll Restriction)
0 = Disable (Off)
1 = Enable (On)
0
23-04-01 Ringing Line Preference for Virtual Extensions -
Extension Group Number
0 ~ 50
(0 = No Setting)
0
SL2100 ISSUE 1.0
1-884
Virtual Extensions
V