NEC SL2100 - Page 899

Program
No.
Program Name Input Data Default
15-10-01 Incoming Virtual Extension Ring Tone Order Set-
up - Virtual Incoming Extension Ring Tone Order
Setup
0 ~ 8
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming extension ring tone
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = Melody4 (2W Digital/IP Multi-
line Terminal)
Priority order:
1 = 0 (Tone Pattern 1)
2 = 1 (Tone Pattern 2)
3 = 2 (Tone Pattern 3)
4 = 3 (Tone Pattern 4)
20-02-19 System Options for Multiline Telephones - Virtual
Extension Mode
0 = No
1 = Yes
0
15-01-13 Basic Extension Data Setup - Special ringtone
choice
0 = Incoming extension ring tone
1 = Tone pattern 1
2 = Tone pattern 2
3 = Tone pattern 3
4 = Tone pattern 4
5 = Melody1 (2W Digital/IP Multi-
line Terminal)
6 = Melody2 (2W Digital/IP Multi-
line Terminal)
7 = Melody3 (2W Digital/IP Multi-
line Terminal)
8 = Melody4 (2W Digital/IP Multi-
line Terminal)
0
Operation
To answer a call ringing a Virtual Extension:
1. Press the flashing Virtual Extension key.
- OR -
Go off-hook.
PRG 20-10-08 needs to be set to on (1) for extension Class of Service.
To place a call to a Virtual Extension:
1. Go off-hook.
2. Dial the Virtual Extension, or press the Virtual Extension key.
The operation depends on the setting in PRG 15-02-21.
To place a call from a Virtual Extension:
1. Press the Virtual Extension key.
The operation depends on the setting in PRG 15-02-21.
2. Place an intercom call or dial a trunk access code to seize an outside line and place your call.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-885
V