NEC SL2100 - Page 918

3. Enter the Caller ID Number.
You can clear the digits entered by pressing Exit key.
VRS INCOM CID
123
(2W Digital/IP Multiline Terminal)
4. Press Hold.
ABB 0005
123
(2W Digital/IP Multiline Terminal)
5. Press Hold. You can set Name (PRG 13-04-02).
ABB 0005
-
(2W Digital/IP Multiline Terminal)
6. Press Hold and Enter the Transfer Mode 0 ~ 3 (PRG13-04-03).
TRF0 = Not defined
TRF1 = Internal Dial
TRF2 = IRG
TRG3 = Remote Monitor
ABB0005
TRF Mode(0-3)?0-
(2W Digital/IP Multiline Terminal)
7. Press Hold and Enter the Ringing Destination (13-04-04).
If you Select TRF1 ~3 following can be entered/
TRF1 (Internal Dial): Up to 36 digits
TRF2 (Incoming ring Group): 0-50
TRF3 (Remote Monitor): Dial Up to 8 digits.
If you press Exit Key you can clear the digits you entered.
ABB0005 ModeX Target
ModeX= X is Mode 1 ~ 3 (13-04-03) (2W Digital/IP Multiline Terminal)
SL2100
ISSUE 1.0
1-904
Voice/Melody Ringing by VM
V