NEC SL2100 - Page 966

To program a key, press Speaker key, dial 751 (for 2-digit codes) or 752 (for 3-digit codes), press the key
and enter the code (e.g., 48 for Voice Over).
Use this key... For this feature... When you ... Key Lamp Status Also see Srvc
Code
Note
Code: 19 + zone
(1 ~ 3)
Operation: Press
key
Paging, External Broadcast to an Ex-
ternal Paging Zone.
On red when activated 703 + zone
Code: 20
Operation: Press
key
Paging, External Broadcast to all Ex-
ternal Paging
Zones.
On red when activated 703 + 0
Code: 21 + zone
(01 ~ 50)
Operation: Press
Key
Paging, Internal Broadcast to an In-
ternal Paging Zone.
On red when activated 701 + zone
Code: 22
Operation: Press
key
Paging, Internal Broadcast to all In-
ternal Paging Zone.
On red when activated 701 + 0 or 00
Code: 23
Operation: Press
key
Meet Me Paging Join a Meet Me
Page.
None 763, 764, or 765
Code: 24
Operation:
Speaker key +
Press Key
Group Call Pickup Answer a call ring-
ing another tele-
phone in your Pick-
up Group.
None
*
#
Code: 25
Operation:
Speaker key +
Press key
Group Call Pickup Answer a call ring-
ing a telephone in
another Pickup
Group - if you do
not know the group
number.
None 769
Code: 26 + Pickup
Group (1 ~ 32)
Operation:
Speaker key +
Press key + Pick-
up Group
Group Call Pickup Answer a call ring-
ing a telephone in a
specific Pickup
Group.
None 768
Code: 27
Operation: Press
key + bin + Line or
Speaker key
Speed Dialing Dial a stored Sys-
tem Speed Dialing
number.
None #2 + bin
Code: 28
Operation: Press
key + bin + Line or
Speaker key
Dial a stored Group
Speed Dialing num-
ber.
None #4 + bin
Code: 29
Operation:Place
call + Press key
Repeat Redial Activate repeat re-
dial while on a call.
Fast Flash while sys-
tem waits to redial
-
Code: 30
Operation:
Save: Place call +
Press key
Redial: Line or
Speaker key +
Press key
Save Number Di-
aled
Save, redial or
check a saved num-
ber.
None 715
SL2100 ISSUE 1.0
2-20
Codes Tables