Configure Advanced Features
139
AC1900, N900, and N450 WiFi Cable Data Gateways
Your settings are saved.
Unblock a Device for MAC Address Filtering
You can unblock a device for MAC address filtering so that the device can access the
Internet.
To unblock a device for MAC address filtering:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > IP Filtering/MAC Filtering.
The IP Filtering / MAC Filtering screen displays.
6. Select the MAC Filtering radio button.
The screen adjusts.
7. In the MAC Filter Table, clear the Enable check box for the device that you want to unblock.
8. Click the Apply button.
The device remains in the MAC Filter Table but is unblocked and can access the Internet.
Remove a Device for MAC Address Filtering
You can remove a device that you no longer need for MAC address filtering.
To remove a device for MAC address filtering:
1. On your computer, launch an Internet browser such as Mozilla Firefox or Microsoft
Internet Explorer.
2. In the address field of your browser, enter http://routerlogin.net.
You are prompted to enter a user name and password.
3. Type admin for the user name and type your password.
If you did not yet personalize your password, type password for the password.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Advanced Setup > IP Filtering/MAC Filtering.
To Next Page
Loading...
Need help?
General