NETGEAR Nighthawk RS700 User Manual

The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Administration > Logs.
The Logs page displays and shows information such as the following:
•
Action: The action that occurred, such as whether Internet access was blocked
or allowed
•
Source IP: The IP address of the initiating device for the log entry
•
Target address: TWhen the Block Sites function is enabled, the name or IP
address of the website or news group visited or to which access was attempted
•
Date and time: The date and time the log entry was recorded
Other information might be displayed.
5.
To customize the logs, scroll down and clear or select the check boxes in the Include
in Log section.
6.
If you make changes, click the Apply button.
Your settings are saved.
7.
To refresh the log screen, click the Refresh button.
8.
To email the log immediately, click the Send Log button.
You must set up email notifications in order to receive the logs. The router emails
the logs to the address that you specified when you set up email notifications. For
more information, see Set up security event email notifications on page 73.
9.
To clear the log entries, click the Clear Log button.
View the Internet connection status or renew the
connection
You can view the Internet connection status and, if necessary, manually restart the
connection.
The information in this section applies to Internet connections that do not require you
to log in to your ISP, L2TP connections, and PPTP connections.
User Manual137Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB