NETGEAR Nighthawk RS700

Table 3. Router factory default settings (Continued)
Default SettingsFeature
Up to 1.4 Gbps at 2.4 GHz
Up to 5.8 Gbps at 5 GHz
Up to 11.5 Gbps at 6 GHz
Operating mode
Guest WiFi network
DisabledWiFi communication
Main SSID name with "-Guest" appendedSSID name
2.4 GHz connection: WPA2-Personal
5 GHz connection: WPA2-Personal
6 GHz connection: WPA3-Personal
Security
DisabledAllow guests to access main
network
General WiFi settings
EnabledSmart Connect
Enabled20/40 MHz coexistence
2346Fragmentation Length
2347CTS/RTS threshold
Long PreamblePreamble mode
Enabled (you cannot disable it)Implicit beamforming
EnabledMU-MIMO
-
Technical specifications
Table 4. Router specifications
DescriptionFeature
TCP/IP, RIP-1, RIP-2, DHCP, PPPoE, PPTP, L2TP, Dynamic DNS, UPnP, and SMBData and routing protocols
North America: 100-240V, 50/60 Hz input
UK, Australia: 220-240V, 50/60 Hz input
Europe: 200-240V, 50/60 Hz input
All regions (output): 19V @ 3.16A DC output
Power adapter
User Manual216Supplemental Information
Nighthawk WiFi 7 Tri-Band Router Model RS700