NETGEAR Nighthawk RS700 User Manual

You might want to disable Smart Connect if you prefer to manually connect your devices
to a specific WiFi band (for example, to connect WiFi 6E or WiFi 7 devices to the 6 GHz
band).
NOTE: If you first disable and then reenable Smart Connect and the SSID and
passwords for the 2.4 GHz, 5 GHz, and 6 GHz radios do not match, the WiFi
settings for the 2.4 GHz radio overwrite the WiFi settings for the 5 GHz and
6 GHz radios.
To disable or reenable Smart Connect:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Wireless.
The Wireless Setup page displays.
5.
Clear or select the Enable Smart Connect check box.
By default, Smart Connect is enabled. Clearing this check box disables Smart Connect.
Selecting this check box reenables Smart Connect.
6.
Click the Apply button.
Your settings are saved.
Hide or broadcast the SSID for a WiFi
network
By default, a WiFi network broadcasts its WiFi network name (also referred to as the
SSID) so that WiFi clients can detect the SSID in their scanned network lists. For additional
User Manual77Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB