Display network folders on a storage device
You can display network folders on a storage device that is connected to the router.
To display network folders:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ReadySHARE.
The USB Storage (Basic Settings) page displays.
The Available Networks Folder section displays the following information:
•
Share Name: If only one USB device is connected, the default share name is
USB_Storage.
You can click the name or you can type it in the address field of your web browser.
If Not Shared is shown, the default share was deleted and no other share for the
root folder exists.
•
Read Access: The read access permission on the network folder. All–no password
(the default) allows all users to access the network folder. The password for admin
is the same one that you use to log in to the router.
•
Write Access: The write access permission on the network folder. All–no password
(the default) allows all users to access the network folder. The password for admin
is the same one that you use to log in to the router.
•
Folder Name: The full path of the network folder
•
Volume Name: The volume name from the storage devic
•
Total Space and Free Space: The capacity and available space the storage
device
User Manual155Share a USB Storage Device
Attached to the Router
Nighthawk WiFi 7 Tri-Band Router Model RS700
To Next Page
Loading...
Need help?
General
