NETGEAR Nighthawk RS700 User Manual

If you are using a PPTP or L2TP connection, the name of the button might be different.
View the PPPoE Internet connection status or renew the
connection
If your router is set up to use a PPPoE Internet connection, you can view the PPPoE
connection status and, if necessary, manually restart the connection.
To view the PPPoE Internet connection status or renew the connection:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Click the ADVANCED tab.
The ADVANCED Home page displays.
5.
In the Internet Port pane, click the Connection Status button.
The Connection Status pop-up window displays. The information that is shown is
specific to a PPPoE connection.
6.
To renew (restart) the PPPoE connection, click the Connect button.
The router continues to attempt to connect. If the router does not connect after
several minutes, the router might be set up with an incorrect service name, user
name, or password, or your ISP might be experiencing a provisioning problem.
User Manual139Manage and Monitor Your
Router
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB