NETGEAR Nighthawk RS700 User Manual

To enable or disable 20/40 MHz coexistence for the 2.4 GHz radio:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Wireless.
The Wireless Setup page displays.
5.
Select or clear the Enable 20/40 MHz Coexistence check box.
Selecting this check box enables coexistence (the default setting) and clearing this
check box disables coexistence.
6.
Click the Apply button.
Your settings are saved.
Change the name for a WiFi network
For each WiFi network, the WiFi network name (also referred to as the SSID) is randomly
generated and is on the router label. You can change the default network name. The
network name can be up to 32 characters long and is case-sensitive.
NOTE: If Smart Connect is enabled, the 2.4 GHz, 5 GHz, and 6 GHz radios use
the same WiFi network name (SSID). To use a different SSID for each band,
disable Smart Connect.
To change the name for a WiFi network:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
User Manual79Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB