NETGEAR Nighthawk RS700 User Manual

8.
In the Host Name field, type the host name that you have registered.
9.
In the Email field, type the email address for your account.
10.
In the Password (6-32 characters) field, type the password for your DDNS account.
11.
Click the Apply button.
Your settings are saved.
12.
To verify that your DDNS service is enabled for the router, click the Show Status
button.
A message displays the DDNS status.
Manage your existing NETGEAR or No-IP Dynamic DNS
account
You can manage the settings for your existing NETGEAR or No-IP Dynamic DNS (DDNS)
account, or reset your password for the DDNS account.
To manage your DynDNS account, visit the DynDNS website.
To manage your existing NETGEAR or No-IP DDNS account or reset the password
for the DDNS account:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Dynamic DNS.
The Dynamic DNS page displays.
5.
Select the Yes radio button.
6.
To manage your DDNS account, click the click here link next to To manage your
DDNS account, and sign in to your account.
User Manual169Use Dynamic DNS to Access a
USB Storage Device From the
Internet
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB