NETGEAR Nighthawk RS700 User Manual

Change your country or region
In some countries, the router is sold with a preconfigured country or region setting and
you might not be able to change it.
To view or change your country or region:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select Wireless.
The Wireless Setup page displays.
5.
From the Region menu, select your region.
In some locations, you cannot change this setting.
6.
Click the Apply button.
Your settings are saved.
Disable or reenable Smart Connect
Smart Connect is enabled by default to select the fastest WiFi band for your router.
When Smart Connect is enabled, the 2.4 GHz, 5 GHz, and 6 GHz radios use the same
WiFi network name (SSID) and network key (password). That means that when you
connect to the router with WiFi, you see only one SSID that allows a WiFi device to
connect to any of the radios.
User Manual76Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB