The LAN Setup page displays.
5.
In the Address Reservation section, click the Add button.
The Address Reservation page displays.
6.
To reserve the IP address for a device that the router detects automatically, in the
Address Reservation Table, select the radio button for the device.
7.
To manually reserve an IP address for a device, do the following:
a.
In the IP Address field, type the IP address to assign to the device.
Choose an IP address from the router’s LAN subnet, such as 192.168.1.x. (In a
typical LAN subnet, IP addresses 192.168.1.0, 192.168.1.1, and 192.168.1.255
are reserved and cannot be used. 192.168.1.0 and 192.168.1.255 are not used
by any devices.)
b.
In the MAC Address field, type the MAC address of the device.
c.
In the Device Name field, type a name for the device.
8.
Click the Add button.
Your settings are saved. The reserved address is entered into the Address Reservation
table on the LAN Setup page.
The reserved address is not assigned until the next time the device requests an IP
address from the router’s DHCP server. Restart the device to force the device to request
an IP address from the router.
Edit a reserved IP address
To edit a reserved address entry:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Setup > LAN Setup.
User Manual103Manage the WAN and LAN
Network Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
To Next Page
Loading...
Need help?
General
