7
Manage the WAN and LAN
Network Settings
You can customize the router’s wide area network (WAN) settings for the Internet port
and local area network (LAN) settings for local devices. We recommend that you install
the router and connect it to the Internet before you change its network settings.
This chapter contains the following sections:
• Manage the WAN settings
• Change the LAN IP address settings or RIP settings
• Set the IP addresses that the router assigns
• Disable the DHCP server feature in the router
• Manage reserved LAN IP addresses
• Manage custom static routes
• Set up an IPTV port or a bridge for a port group or VLAN tag group
• Enable or disable flow control for Ethernet ports
• Manage Ethernet LAN port aggregation to a LAN device
93
To Next Page
Loading...
Need help?
General
