5.
Click the Next button.
The Add WPS Client page displays.
By default, the Push Button (recommended) radio button is selected.
6.
Select the PIN Number radio button.
7.
In the Enter Clients' PIN field, enter the PIN of the device.
8.
Click the Next button.
For four minutes, the router attempts to find the WiFi device.
9.
Within four minutes, go to the WiFi device and use its WPS software to join the
network without entering a password.
The WPS process automatically sets up the WPS-enabled device with the network
password when it connects. The router web interface displays a confirmation message.
User Manual92Manage WiFi Settings
Nighthawk WiFi 7 Tri-Band Router Model RS700
To Next Page
Loading...
Need help?
General
