NETGEAR Nighthawk RS700 User Manual

Set the time-out period for port triggering
The time-out period for port triggering controls how long the inbound ports stay open
when the router detects no activity. A time-out period is required because the router
cannot detect when the service or application terminates.
To specify the time-out for port triggering:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
5.
Select the Port Triggering radio button.
The port triggering settings display.
6.
In the Port Triggering Time-out field, enter a value up to 9999 minutes.
The default setting is 20 minutes.
7.
Click the Apply button.
Your settings are saved.
Disable an individual port triggering rule
By default, port triggering is enabled. You can disable port triggering temporarily
without removing any port triggering rules (see Disable port triggering on page 197).
User Manual196Manage Port Forwarding and
Port Triggering
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB