NETGEAR Nighthawk RS700 User Manual

2.
Enter http://www.routerlogin.net.
A login window displays.
3.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
4.
Select ADVANCED > USB Functions > Advanced Settings.
The USB Storage (Advanced Settings) page displays.
5.
Select the FTP (via Internet) check box.
The default port is number 21. Password protection is enabled by default. We highly
recommend that you keep password protection enabled.
6.
Click the Apply button.
Your settings are saved.
The link that lets you access the device over the Internet is
ftp://public-ip-address/shares. In this link, public-ip-address represents one of the
following:
•
The IP address that is assigned to the router’s Internet port. You can view this IP
address on the ADVANCED Home page.
•
If you set up a DDNS account, the router’s DNS name, for example,
yourname.mynetgear.com.
7.
To limit read and write access of the attached USB storage device to the admin user,
select the device in the Available Network Folders section.
If only one device is connected, it is automatically selected.
8.
Click the Edit button.
The Edit page displays.
9.
From the Read Access menu, select admin.
10.
From the Write Access menu, select admin.
11.
Click the Apply button.
User Manual171Use Dynamic DNS to Access a
USB Storage Device From the
Internet
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB