NETGEAR Nighthawk RS700 User Manual

2.
Launch a web browser from a computer or your iOS device that is connected to the
router network.
3.
Enter http://www.routerlogin.net.
A login window displays.
4.
Enter the router admin user name and password.
The user name is admin. The password is the one that you specified when you set
up your router. The user name and password are case-sensitive.
The BASIC Home page displays.
5.
Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
6.
Make sure that the Enable VPN Service check box is selected.
For more information about the VPN configuration for the router, see Enable
OpenVPN service on the router on page 176.
7.
Click the For Smart Phone button to download the router’s OpenVPN configuration
file to your computer or iOS device.
If you download the configuration file to your computer, unzip the .ovpn file, and
send it to your iOS device.
8.
On your iOS device, do the following:
a.
Open the OpenVPN Connect app.
b.
Import the .ovpn configuration file.
NOTE: If you sent the configuration file from a computer, you should
see the file listed. If you downloaded the file directly to your iOS device,
locate the download folder and share the unzipped .ovpn configuration
file with the OpenVPN Connect app.
You can now open a VPN tunnel to the router.
For more information about installing and using OpenVPN on your iOS device, visit
https://www.vpngate.net/en/howto_openvpn.aspx#ios.
User Manual181Use OpenVPN to Access Your
Network
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB