Virtual Private Networking Using IPSec Connections
145
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308
Note: Perform these tasks from a computer that has the NETGEAR
ProSafe VPN Client installed.
To use the Configuration Wizard to set up a VPN connection between the VPN client
and the VPN firewall:
1. Right-click the VPN client icon in your Windows system tray, and select Configuration
Panel. The Configuration Panel screen displays.
Figure 84.
1. From the main menu on the Configuration Panel screen, select Configuration > Wizard.
The Choice of the remote equipment wizard screen (screen 1 of 3) displays.
To Next Page
Loading...
