Neural DSP Quad Cortex - How do I find the Looper X?; How much looping time does the Looper X have?; Does the Looper X stop when switching presets?

42
Presets
• QUANTIZE KNOB: Syncs the looper to Quad Cortex’s Tempo
or to an external MIDI clock. Select the number of beats to
quantize according to the time signature used.
• MIDI CLOCK START KNOB: Controls whether the RECORD,
DUPLICATE, and PLAY functions are started when it receives
a MIDI clock start. When enabled, it overrides the Threshold
feature.
PAGE 3
The Looper is a dedicated device block. Tap an empty space on The Grid, select the Looper
section then you will nd the Looper X.
How do I nd the Looper X?
You can record up to 4 minutes and 44 seconds.
How much looping time does the Looper X have?
An active loop is persistent through Preset changes as long as the Preset you are changing to
also vhas a Looper block added.
Does the Looper X stop when switching presets?
Yes, Looper X parameters can be controlled via specic reserved CC messages. More
information on page 93.
Can the Looper X parameters be controlled by MIDI?