78
Neural Capture
• INST LEVEL METER: Input signal meter.
• IN 1 LEVEL METER: Input signal meter.
• HEADPHONE LEVEL KNOB: Sets the output level of the
headphones.
• AUTO-SET BUTTON: Sets the IN 1 level automatically. Play
your instrument until the IN 1 knob stops moving.
• Calibration: Measuring latency of the connected device. In the
case of a digital device, keep latency as low as possible.
• Recording Signals: Recording signals that will be used for
modeling.
• Sanity Check & Training: The core of Neural Capture. Training
a neural network to emulate the sound of your device. If the
Sanity Check fails, use the AUTO-SET feature to get optimal
input levels.
Tap the Start Capture button to begin. The progress window will
show the following steps:
START CAPTURE
CancelNeural Capture
Calibration
Recording Signals
7
Neural Capture in progress
Recording a bunch of signals that will be used for modeling.
To Next Page
Loading...