35Presets
Quad Cortex is compatible with many different expression pedals.
Devices with the following features should function correctly:
• Single TRS expression output (Wah or Volume outputs are not
supported).
• Dual TRS outputs (Sweep control and toe-switch dedicated
outputs).
• Latching toe-switch.
• Momentary toe-switches will only work when latching
emulation is set to “On”.
• Linear or logarithmic curve.
• Minimum value knob.
• Polarity/Reverse function.
What expression pedals are supported?
The EXP inputs assigned to a device block can be remembered by
using the “Set parameters as defaults” option after assigning an
expression pedal to a parameter.
The parameter position and the toe-switch polarity are not
remembered while saving Presets. The current parameter position
and toe-switch state are maintained while loading presets.
When a parameter is assigned to an expression pedal, the Scene data
is also ignored for that parameter.
Are the assignments remembered while
switching presets and scenes?
To Next Page
Loading...