53Modes
Scene Mode allows you to control the settings of any number of
blocks in a Preset. Tap-and-hold a parameter to assign it to Scenes
regardless of the current active Mode .
SCENE A is the default Scene of any new Preset. To change a Preset’s
default Scene, just save the Preset with another Scene loaded.
Tap-and-hold a Scene-assigned parameter to prompt the unassign
dialog. Removing the assignment will restore the value from the main
Scene.
Scene Examples
1/2
Out
1
In
SCENE
A
E4 The Lick
A
1/2
Out
1
In
SCENE
B
E4 The Lick
B
1/2
Out
1
In
SCENE
C
E4 The Lick
C
Scene Mode
Scene Bypass State Behavior
(Settings > Device Options)
This feature controls whether
changes to the bypass state
of a block in Scene Mode are
automatically saved to the
active Scene. By default, all the
changes are overwritten.
The currently active Scene
displays as a letter block at the
upper-right corner of the screen.
To Next Page
Loading...