Neural QUAD CORTEX - Page 54

54Modes
The footswitch LEDs will illuminate according to the selected Scene.
Eight scenes are available for each Preset.
Footswitch LEDs
While using Scene mode, press the Up and Down footswitches to
navigate through Presets.
Press and hold either the Up or Down footswitch to navigate
through banks. The Preset name and active footswitch will also blink
intermittently. To conrm the change, press the blinking footswitch.
Navigating through Presets
Copy/Paste Scenes
Swap Scenes
Scenes can be copied and pasted into different footswitches via the
main menu on The Grid. This action can be performed in any mode.
If you want to cancel the whole operation, tap the CANCEL button.
Scenes can be swapped via the main menu on The Grid. This action
can be performed in any mode.
If you want to cancel this operation, tap CANCEL.
A