37Presets
The STEREO Switch is available
for all the Splitter types.
Clicking the MUTE button either
in the Splitter or in the Mixer
parameter editor will mute the
whole Splitter/Mixer path.
Splitter/Mixer Parameters
BALANCE SPLITTER
• STEREO Switch: Tap to toggle the Stereo Split feature, assigning
Left and Right sides of the stereo output of any preceding block
to the Main Row (A) and the Splitter/Mixer path (B) accordingly.
• BALANCE Knob: Determines the output balance between the
Main Row (A) and the Splitter/Mixer path (B).
A/B SPLITTER
• LEVEL TO A Knob: Determines the Main Row (A) level.
• LEVEL TO B Knob: Determines Splitter/Mixer path (B) level.
CROSSOVER SPLITTER
• FREQUENCY Knob: Determines the frequency cut value.
• MODE Switch: Tap to swap the band assigment.
MIXER SETTINGS
• LEVEL A Knob: Main Row (A) volume control.
• PAN A Knob: Main Row (A) output panning control.
• LEVEL B Knob: Splitter/Mixer (B) volume control.
• PAN B Knob: Splitter/Mixer (B) output panning control.
• PHASE Switch: Tap to invert the phase of the Splitter/Mixer path.
• MIXER LEVEL Knob: Main output volume control.
To Next Page
Loading...