Nibe FIGHTER 1250 - Page 65

63
NIBE FIGHTER 1250
Menu 9.4.0 TEST/Forced operat. [S]
Pressing the enter button takes you to sub-menus that can
be used during installation to check that the correct con-
nection has been carried out.
Menu 9.4.1.0 Forced operation [S]
Menu 9.4.1.1 Forced operation [S]
When ”On” is selected in this menu, the user temporarily
takes control of the relays in the heat pump. The setting
automatically returns to “Off”, 30 minutes after the last
button was pushed or after a restart.
Selection option Off and On.
- Factory setting: Off
Menu 9.4.1.2 – 9.4.1.15 RE1 – RE14 [S]
To select manual control of the relays.
Selection option Off and On.
- Factory setting: Off
Menu 9.4.1.16 REX2 [S]
To select manual test of alarm relay X2.
Selection option Off and On.
- Factory setting: Off
Menu 9.4.1.17 REX3 [S]
To select manual control of alarm relay X3.
Selection option Off and On.
- Factory setting: Off
Menu 9.4.1.18 Return [S]
Pressing the enter button returns you to Menu 9.4.1.0
Menu 9.4.2.0 Input status [S]
Menu 9.4.2.1 X1:1-2 [S]
Menu 9.4.2.2 X1:3-4 [S]
Menu 9.4.2.3 X1:5-7 [S]
Menu 9.4.2.4 X1:6-7 [S]
Menu 9.4.2.5 X1:8-11 [S]
Menu 9.4.2.6 X1:9-11 [S]
Menu 9.4.2.7 X1:10-11 [S]
Menu 9.4.2.8 X1:12-13 [S]
Menu 9.4.2.9 X1:14-15 [S]
Menu 9.4.2.10 X1:16-17 [S]
Menu 9.4.2.11 X4:1-2 [S]
Menu 9.4.2.12 X4:3-4 [S]
Control
E
Menu 9.4.2.13 X4:5-6 [S]
Menu 9.4.2.14 X4:7-8 [S]
Menu 9.4.2.15 X4:9-10 [S]
Menu 9.4.2.16 X4:11-12 [S]
Menu 9.4.2.17 X4:13-14 [S]
Menu 9.4.2.18 X4:15-16 [S]
Menu 9.4.2.19 X5:1-2 [S]
Menu 9.4.2.20 X5:3-4 [S]
Menu 9.4.2.21 X5:5-6 [S]
Menu 9.4.2.22 X5:7-8 [S]
Menu 9.4.2.23 X5:9-10 [S]
Menu 9.4.2.24 X5:11-12 [S]
Menu 9.4.2.25 X5:13-14 [S]
Menu 9.4.2.26 X5:15-16 [S]
Menu 9.4.2.27 X5:17-18 [S]
Menu 9.4.2.28 X5:19-20 [S]
Menu 9.4.2.29 X6:1-2 [S]
Menu 9.4.2.30 X6:3-4 [S]
Menu 9.4.2.31 J8:1-2 [S]
Menu 9.4.2.32 J8:3-4 [S]
Menu 9.4.2.33 PCB 102 X1.5-6 [S]
Menu 9.4.2.34 PCB 102 X1.7-8 [S]
Menu 9.4.2.35 Return [S]
Pressing the enter button returns you to Menu 9.4.2.0
Menu 9.4.3 Return [S]
Pressing the enter button returns you to Menu 9.4.0.
Incorrect management of the menus below
can seriously damage the heat pump.
Note!