Nilfisk-Advance SC500 Service Manual

Scrub System, REV 101Service Manual – SC500
Checking/Replacing REV Motor Carbon Brushes (Continues)
Figure 15
◦ Install the other three carbon brushes.
8. Install the wave washer.
9. Install the top cover.
◦ Install it far enough so that the carbon brushes make contact with the collector when the temporary
support wires are removed. Then remove the temporary wires.
Collector
Carbon brush
Figure 16
◦ Install the top cover.
◦ Install the nuts.
◦ Seal the wire mounting holes with silicone sealant.

Nilfisk-Advance SC500 Specifications

General

Brand	Nilfisk-Advance
Model	SC500
Category	Floor Machine
Language	English