Electrical System 58Service Manual โ SC500
Troubleshooting
See the other chapters for previously provided instructions for other electrical system components.
Trouble Possible Causes Remedy
The machine is not working Batteries (BAT) ๎at or connections faulty Charge the batteries or clean the
connections
The batteries (BAT) are broken Check the battery no-load voltage
The battery charger (CH) is broken Replace
The wiring harness is cut or pressed or short circuited Repair
Note: A damage to the battery charger or its connections can prevent the machine from
operating properly.
To Next Page
Loading...
Need help?
General
