General Information
17
Service Manual – SC500
Maintenance
The lifespan of the machine and its maximum operating safety are ensured by correct and regular maintenance.
Warning! Read carefully the instructions in the Safety chapter before performing any
maintenance procedure.
The following tables provides the scheduled maintenance. The intervals shown may vary according to particular
working conditions, which are to be dened by the person in charge of the maintenance.
For instructions on maintenance procedures, see the following paragraphs.
Scheduled Maintenance Table
Procedure
Daily, after using
the machine
Weekly
Every six
months
Yearly
Battery Charging
Squeegee Cleaning
Brush/pad cleaning
Recovery tank and debris tray cleaning, and cover
gasket check
EcoFlex system cleaning and draining
Squeegee blade check
Solution Filter Cleaning
Battery (WET) uid level check
Squeegee blade replacement
Brush motor carbon brush check or replacement
Drive system motor carbon brush check or replacement
Brush deck vibration-damper replacement (only for REV
version)
To Next Page
Loading...
Need help?
General
