Squeegee System 119Service Manual – SC500
Maintenance and Adjustments
Squeegee cleaning
Note: The squeegee must be clean
and its blades must be in good
conditions in order to get a good
drying.
Warning! It is advisable to wear
protective gloves when
cleaning the squeegee
because there may be sharp
debris.
1. Drive the machine on a level oor.
2. Ensure that the machine is off and the operator
key has been removed.
3. Loosen the handwheels and remove the
squeegee.
4. Wash and clean the squeegee. In particular,
clean the compartments (A) (Figure 2) and the
vacuum hole (B). Check that the front blade (C)
and the rear blade (D) are integral and free from
cuts and lacerations; if necessary replace them.
5. Assemble in the reverse order of disassembly.
A
A
B
D
C
D
C
Figure 2
To Next Page
Loading...
Need help?
General
