Nilfisk-Advance SC500 Service Manual

Wheel System, Traction 124Service Manual – SC500
Specications
Description / Model
Advance / Nilsk
SC500 20 B
Advance
SC500 20R B
Driving wheel diameter
7.8 in (200 mm)
Driving wheel specic pressure on the oor (*)
101 psi (0.7 N/mm
2
)
Rear wheel diameter 3.1 in (80 mm)
Rear wheel specic pressure on the oor (*) 304 psi (2.1 N/mm
2
)
AMER electric wheel drive unit technical data
Power
0.27 hp (200 W)
Voltage
24V
Transmission ratio
13:1
Protection class
IP44
Insulation class
F
TEKNO electric wheel drive unit technical data
Power
0.27 hp (200 W)
Voltage
24V
Transmission ratio
11:4
Protection class
IP44
Insulation class
F
Drive speed (variable) 0 - 3.1 mi/h (0 - 5 km/h)
Maximum gradient when working 2% (1.14°)
(*) Machines have been tested under the following conditions:
◦ Battery maximum size
◦ Maximum brush and squeegee size
◦ Full detergent tank
◦ Optional equipment installed
◦ Wheel weight checked
◦ Print on the oor checked on cement for each single wheel
◦ Result expressed as maximum value for both front and rear wheels

Nilfisk-Advance SC500 Specifications

General

Brand	Nilfisk-Advance
Model	SC500
Category	Floor Machine
Language	English