Squeegee System 117Service Manual – SC500
Squeegee System
Functional Description
The squeegee system cleans the liquid off the oor, which is then collected by the recovery system.
The squeegee is mounted on castors and the weight of the system presses it down on the oor.
The squeegee is attached with two quick-fastening handwheels which t in the slots of the squeegee support.
In case of xed obstacles, the quick-t system allows for squeegee immediate removal.
The squeegee can be raised and lowered by the operator using just their foot on the squeegee support footrest
thanks to a mechanism consisting of two levers and a gas spring.
The angle of the squeegee and the correct adherence of the blades on the oor can be adjusted with a knob.
The front blade has an opening in the bottom edge so the squeegee can collect the water on the oor. The design
and the central duct make it easy for the squeegee to clear the water. The bottom edge of the blade is smooth.
All 4 functional edges of each blade can be used before it needs replacing.
To Next Page
Loading...
Need help?
General
