Nordson Encore Series User Manual

Table of Contents v
Part 1612500−02
E 2018 Nordson Corporation
Parts 7-1...................................................
Introduction 7-1.............................................
System Part Numbers 7-1...................................
Spray Gun 7-2..............................................
Electrode Support Assemblies 7-5...........................
Spray Gun Options 7-6......................................
Cable Extension 7-6......................................
Optional Flat and Corner Spray Nozzles 7-6.................
Controller Parts 7-7.........................................
Front Panel and Internal Cabinet Ground Parts Illustration 7-7..
Front Panel and Internal Cabinet Ground Parts List 7-8........
Rear Panel Parts Illustration 7-9............................
Rear Panel Parts List 7-10..................................
Manifold Illustration and Parts List 7-11.......................
System Components and Parts 7-12...........................
System Components and Kits 7-12..........................
Powder Hose and Air Tubing 7-12...........................
System Options 7-13......................................
nLightent 7-13............................................
Wiring Diagram 8-1.........................................

Nordson Encore Series Specifications

General

Maximum Output Voltage	100 kV
Power Source	Electric
Maximum Powder Output	20 lbs/hr (9.07 kg/hr)
Air Consumption	10-15 CFH (4.7-7.1 L/min)
Application	Powder coating
Technology	Electrostatic
Maximum Flow Rate	20 lbs/hr (9.07 kg/hr)
Weight	1.5 lbs (0.68 kg)