Nortel 1140E - Page 74

Configuring the IP Phone 1140E
74
Dual pairing headsets
Take special care when using a "dual pairing" type of Bluetooth wireless
technology headset. This type of headset can be paired to the base of the
headset as well as to the IP Phone 1140E. If the headset is paired to
both, the IP Phone 1140E is the second device, and the following applies:
Press the headset "telephone" key:
• If a single tone sounds, the headset is connected to the base.
• If a double beep sounds, the headset is connected to the
IP Phone 1140E.
10. Choose one of the following:
• If only one headset is paired, proceed to
step 11.
• If more than one wireless headset is
paired, the first headset paired is
automatically made the active device. To
make a different headset active, do the
following:
— Press the Right navigation key one
or more times to highlight the Set
button (next to the Set Active Device
item).
— Press the Select/Set Context-
sensitive soft key.
The message "Set active: “device name”
appears and means the headset named
is now the active headset and is used
when you press the headset key.
11. Press the Exit Context-sensitive soft key
to exit to the main display. Changes are
saved automatically.
Exit