NFS-640 Programming Manual P/N 51333:B 10/03/2003 103
Appendix F: Type Codes
What are Type Codes?
Type Codes are software selections that you select for initiating devices (detectors and monitor
modules) and output devices (control modules, NACs, and Panel Circuits). Some Type Codes are self-
explanatory; that is, the Type Code matches the function of the device, such as a “Monitor” for a
monitor module, “Photo” for a photoelectric detector, and so on. Type codes also provide special
functions, such as activating switches, solenoids, and control panel functions.
How to Select a Type Code
You select a Type Code through the Point Programming screen. For instructions, refer to “How to
Modify or Delete a Point (2=point)” on page 21.
In this Appendix
This appendix contains detailed descriptions of Type Codes for input and output devices, as listed
below:
Type of Device
Refer to
page
Type Codes for Intelligent Detectors 104
Type Codes for Monitor Modules 105
Type Codes for Control Modules 106
NAC and Panel Circuit Type Codes 107
www.PDF-Zoo.com
To Next Page
Loading...
Need help?
General
