41 EV2 Series DVR
2) Device & Size: This information lists the installed drives and their respective
capacities, which is not used currently.
3) Status:
a. CD/DVD: CD or DVD is installed for backup usages.
b. Unknown: New installed Disk.
c. Empty: Formatted but not used in current DVR.
d. Recording Data: HDD stored Recording data but not used in current DVR.
e. Back up Data: HDD stored Backup data.
f. Other data: neither Backup nor Recording Data, including AVI file.
g. Damaged
<Note>: Disconnected Disk will be disappearing from Disk Menu.
2. Action :
1) None: By default.
2) Assign to Record: Initialize the selected HDD. It formats the drive and all data
on the drive is erased. External SATA HDD can be used to extend HDD capacity.
Selected HDD will be move to [Recording Disk] after formatting.
3) Initialize for backup:
Selected device such as Media or External HDD formatted for backup usages.
Here is the guide for backing up data to various devices.
Once you press the start button, this pop-up window is displayed to ask you to
confirm the initializing for back up: YES or NO.
4) Link Record Disk
: This function is used for add [used HDD] from same model without formatting.
< Note: There are limitations for using this function >
A.DVR should be empty (NO HDD). If RECORDING DISKS exist, it will not work.
B. The used HDD should be from same series. If from a different series, it will fail.
C. There should be no time duplication in HDD.
To Next Page
