Nuvico EV2-400 - Preset & Tour

5)
To escape from PTZ mode, press ESC button o
button) the outside of control box to have
ESC button.
2. Preset & Tour
Button
Set preset position; SPOT OUT on remote contro
Move the PTZ into desired location.
Press the Preset button.
Custom 1 will illuminate.
Set the # for the Preset location.
Press OK to save and exit.
Go to preset position; INFO on remote controller
Press Go to button.
Enter the desired Preset # and
Start Auto Tour; BACKUP on remote controller
Press Auto Tour Button.
Press the + button and enter the range of Preset and press OK.
67
To escape from PTZ mode, press ESC button o
n PTZ
controller
button) the outside of control box to have
the virtual remote
control
Function
Set preset position; SPOT OUT on remote contro
ller
Move the PTZ into desired location.
Press the Preset button.
Custom 1 will illuminate.
Set the # for the Preset location.
Press OK to save and exit.
Go to preset position; INFO on remote controller
Press Go to button.
Enter the desired Preset # and
press OK.
Start Auto Tour; BACKUP on remote controller
Press Auto Tour Button.
Press the + button and enter the range of Preset and press OK.
EV2 Series DVR
controller
. Or click (right
control
ler. Then click
Press the + button and enter the range of Preset and press OK.