54 EV2 Series DVR
1) Description of Location.
A. LAN: Connect by Local IP. If you are connection from within your network, you only
need to enter the IP address of the system into the S/W (ex. 192.168.0.50)
B. WAN: Connect by DDNS. If you are connecting from outside your network, use the
DDNS to configure the S/W. (Ex. L123456.dvrhost.com).
C. WAN: Connect by IP address. If you are connecting from outside your network and if
you know your Static IP address, use the IP address to configure the S/W. (Ex.
http://124.137.23.72:6000)
2) Description of Symbols.
○ : Connected.
x : Not able to connect
△: There’s some limitation depends on Router or Network connection
★ : Need to use Port Forwarding
3) Description of Color.
Yellow - Recommended
Grey - Not available
White – Depends on Router or Network condition.
2. How to use DVR for DHCP
<Note> Each Router has different port forwarding settings. Please refer to the router manual
or contact to your router manufacture for assistance.
Internet
: DHCP
DVR : DHCP
Router:
: Port Forwarding /DMZ
DVR : Static IP
To Next Page
Loading...
