EasyManua.ls Logo

NuWave BRIO 6Q - Time & Preheat Settings

NuWave BRIO 6Q
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
nuwavenow.com
21
ENGLISH
nuwavenow.com
21
Note: Cooking temperature can be adjusted at any time
before or during the cooking process. Once the display
is switched to temperature display, it will remain in the
temperature display.
TIME
1. To set a different cooking time, press the [↑] and [↓]
buttons above and below the time icon. The control
panel will display 00:15 and time.
The time will adjust in 1-minute increments.
2. To quickly adjust the time, hold down the arrows until
desired cooking time is reached.
The maximum selectable cooking time differs
depending on the selected cooking temperature.
60°F - 200°F, maximum cooking time is 99 days, 99
hours (99.99).
205°F - 275°F, maximum cooking time is 99 hours, 99
minutes (99:99).
280°F - 345°F, maximum cooking time is 10 hours
(10:00).
350°F - 400°F, maximum cooking time is 1 hour
(01:00).
Note: Cooking time can be adjusted at any time before or
during the cooking process.
PREHEAT
The unit will preheat to the temperature of the next
cooking cycle. For example, if Sear 1 is set to 400F, the
unit will preheat to 400F. If Sear 1 is not used, the unit
will preheat to the set cooking temperature.
1. Press the ON/OFF button and adjust your cooking
temperature and time for stage 1 cooking.
2. Press the PREHEAT button to engage the preheat function.
The LED display will show set cooking temperature,
pre, and temp.
The unit will ALWAYS preheat to the cooking
temperature of the next cooking cycle.
3. Press the START/PAUSE button to begin preheating.

Other manuals for NuWave BRIO 6Q

Related product manuals