NXP Semiconductors PN76 Series User Manual

NXP Semiconductors
AN13134
PN76 family evaluation board quick start guide
2.1.4.3 LED control J63 and J64
J63 and J64 control the lines to the LEDs. If connected, the LEDs are controlled by the Arduino controller
interface. If the PNEV76FAMA is used in standalone mode, disconnect those two jumpers to use the onboard
LEDs.
Figure 14. LED Control J63 J64
AN13134 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
Application note Rev. 2.5 — 2 May 2023
16 / 57

NXP Semiconductors PN76 Series Specifications

General

Brand	NXP Semiconductors
Model	PN76 Series
Category	Motherboard
Language	English