NXP Semiconductors
AN13134
PN76 family evaluation board quick start guide
4.1.3.1 Flash example
If you build your example in "Release" configuration, you can now flash it with the GUI Flash Tool. For this click
the GUI Flash Tool button at the top toolbar:
Figure 38. GUI Flash Tool button
MCUXpresso searches available programmer like a LPC-Link2 or SEGGER J-Link now. In case multiple probes
are detected chose the one connected to the NFC-Debug port on the PNEV76FAMA board and click "OK".
AN13134 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
Application note Rev. 2.5 — 2 May 2023
38 / 57
To Next Page
Loading...
