NXP Semiconductors
AN13134
PN76 family evaluation board quick start guide
2.2 LPC55S16 host MCU
The default host controller for the PN76 SDK is the NXP LPC55S16. It is an Arm Cortex-M33 architecture MCU
with built-in advanced security features. The examples (Host Software) are preconfigured to be run on the
LPC55S16-EVK which plugs in on the bottom side (Arduino controller) of the PNEV76FAMA board.
Development board link: [4]
Figure 15. LPC55S16-EVK top view
AN13134 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
Application note Rev. 2.5 — 2 May 2023
17 / 57
To Next Page
Loading...
Need help?
General
