NXP Semiconductors
AN13134
PN76 family evaluation board quick start guide
Security — Customer understands that all NXP products may be subject to
unidentified vulnerabilities or may support established security standards or
specifications with known limitations. Customer is responsible for the design
and operation of its applications and products throughout their lifecycles
to reduce the effect of these vulnerabilities on customer’s applications
and products. Customer’s responsibility also extends to other open and/or
proprietary technologies supported by NXP products for use in customer’s
applications. NXP accepts no liability for any vulnerability. Customer should
regularly check security updates from NXP and follow up appropriately.
Customer shall select products with security features that best meet rules,
regulations, and standards of the intended application and make the
ultimate design decisions regarding its products and is solely responsible
for compliance with all legal, regulatory, and security related requirements
concerning its products, regardless of any information or support that may be
provided by NXP.
NXP has a Product Security Incident Response Team (PSIRT) (reachable
at PSIRT@nxp.com) that manages the investigation, reporting, and solution
release to security vulnerabilities of NXP products.
NXP B.V. - NXP B.V. is not an operating company and it does not distribute
or sell products.
10.3 Licenses
Purchase of NXP ICs with NFC technology — Purchase of an NXP
Semiconductors IC that complies with one of the Near Field Communication
(NFC) standards ISO/IEC 18092 and ISO/IEC 21481 does not convey an
implied license under any patent right infringed by implementation of any of
those standards. Purchase of NXP Semiconductors IC does not include a
license to any NXP patent (or other IP right) covering combinations of those
products with other products, whether hardware or software.
10.4 Trademarks
Notice: All referenced brands, product names, service names, and
trademarks are the property of their respective owners.
NXP — wordmark and logo are trademarks of NXP B.V.
AMBA, Arm, Arm7, Arm7TDMI, Arm9, Arm11, Artisan, big.LITTLE,
Cordio, CoreLink, CoreSight, Cortex, DesignStart, DynamIQ, Jazelle,
Keil, Mali, Mbed, Mbed Enabled, NEON, POP, RealView, SecurCore,
Socrates, Thumb, TrustZone, ULINK, ULINK2, ULINK-ME, ULINK-
PLUS, ULINKpro, μVision, Versatile — are trademarks and/or registered
trademarks of Arm Limited (or its subsidiaries or affiliates) in the US and/or
elsewhere. The related technology may be protected by any or all of patents,
copyrights, designs and trade secrets. All rights reserved.
DESFire — is a trademark of NXP B.V.
EdgeVerse — is a trademark of NXP B.V.
MIFARE — is a trademark of NXP B.V.
MIFARE Classic — is a trademark of NXP B.V.
MIFARE Ultralight — is a trademark of NXP B.V.
AN13134 All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
Application note Rev. 2.5 — 2 May 2023
54 / 57
To Next Page
Loading...
