4 Safety Instructions
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01) 7 / 80
In the patient environment, use devices that conform to IEC 60601-1. If
a multiple power socket is to be used, or if a device is to be used that does
not meet the IEC 60601-1 standard, use an isolating transformer.
Information about the operation of an ME system
The Corvis® ST and a connected computer form a medical
electrical system (ME system) according to DIN EN 60601-1. If you
connect additional devices, such as, for example a printer, those devices
become part of the ME system.
Make sure that all devices of the ME system meet the requirements
of IEC 60601-1 or IEC 60950-1.
Note that an output voltage of maximum 5.5 V DC is supplied by a
device connected via USB.
Abb. 4-1: Patient environment
To Next Page
Loading...
