OCULUS Corvis ST - Dismantling, Transport and Storage; Removal

16 Dismantling, Transport and Storage
62 / 80 Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01)
16 Dismantling, Transport and Storage
Before you transport or store the Corvis® ST you may have to dismantle it
properly and lock the transport safety device.
16.1 Removal
 Switch off the Corvis® ST with the On/Off Switch (3).
 Unplug the power cord.
 Unplug the power cord (2) of the device.
 If necessary, disconnect the USB cable from the USB port of the
computer/Laptop (1).
 Open the cover with the display.
 Move the Corvis® ST over the opening (1) of the transport safety
device in the adjusting base.
2
1
3
Abb. 16-1: Open the cover with the display