OCULUS Corvis ST - Automatic Backup

12 Perform a Measurement
Instruction Manual Corvis® ST (G/72100/XXXX/EN 1019 Rev01) 43 / 80
 Confirm your selection with [OK].
 To import the data, press the [Restore] button (1). All data in the
appropriate directory are copied to the Patient Data Management
software.
12.7.6 Automatic backup
In addition to the manually performed backup, it is also possible to
automatically run a backup when exiting the Patient Data Management
system. The settings required for this can be made in the "Settings" area,
see User Guide.